Configuring NT for Dial-Up Access to SLAC

• Open the Control Panels window
• Open the Network Control Panel

• Click on the Services tab
• Select Remote Access Service (if Remote Access Service does not appear you should contact your group Workstation Administrator and have it installed)
• Click on Properties

• Select the COM port and modem that you will be using from this list
• If the COM port has not been setup for a modem see the section Installing a New Modem below
• Click on the Configure button
  

• Make sure that the Dial Out Only button is the only one selected then click OK

• Select the Network button from the Remote Access Setup window to get this window
• Make sure that only the TCP/IP box is checked then click OK
• Click Continue in the Remote Access Service window
• Click Close in the Network Control Panel window
• Otherwise, click the New button in the Dial-Up Networking dialog box

• Double-click on My Computer and double-click the Dial-up Networking icon
• If this is the first phonebook you will see the Phonebook is empty window
• Click OK to add an entry
• Otherwise, click the New button in the Dial-Up Networking dialog box

• Type a descriptive name for your phonebook entry
• Click on the Next button to continue

• In the Server window leave all the boxes unchecked
• Click on the Next button to continue

• Enter in the phone number for dialing SLAC - 223 0172
• Include area code 650 if dialing in from out of 650
• Click on the Next button to continue

• Click on the Finish button

• Click on the More button and select Edit Entry and Modem Properties....

• Select the Server tab
• Click on the TCP/IP button

• Make the changes as shown in the example
• Click on the OK button
• Click the OK button in the Edit Phonebook Entry window
• Click the Close button in the Dial-Up Networking window

• Double-click on My Computer and double-click the Dial-up Networking icon
• Select the phonebook entry for dialing to SLAC
• Click on the Dial button

• In the Dial-Up Networking window click on the Dial button
• Enter your dial-up User name
• Enter your dial-up Password
• Leave the Domain box empty

• If you connected successfully you will get this window

Now that you have remote access service set up on your computer, you'll see that a "Logon using Dial-Up Networking" check box appears in the Logon Information dialog box when you first log on to Windows NT.

If check this box, Windows NT makes a dial-up connection as part of the logon process, so that your network is available right away.

• Connect your modem to a COM port on your PC
• Click on the Add button in the Remote Access Setup window to get this window.
• Click on the Install Modem button

• Click on the Next button

• When your modem is found click on the Next button and follow the on screen instructions
• If the modem install utility is unable to detect and identify your modem, it presents a list of modem manufacturers and models from which you can select from.